Adjusting The Volume Balance; Adjusting The Volume Level Of Main Output Audio; Adjusting The Volume Level Of Usb Output Audio - Roland VR-3EX Owner's Manual

Adjusting the Volume Balance

This adjusts the volume balance of channels 1 through 7/8, the
internal microphones, and HDMI audio.
1.
Raise and lower the channel faders to adjust the volume
balance on the respective channels
Raise the fader for a channel you want to make more prominent, such
as, for example, a presenter's microphone, and lower the faders for
other channels.
On channels that have no input or that carry audio that is not for
output, lower their faders all the way.
2.
Turn the [INTERNAL MIC] knob to adjust the volume level
of the internal microphones.
You can use the internal microphones to mix ambient sounds, such
as the voices of nearby people, into the main output audio.
When you aren't using audio from the internal microphones, turn
the [INTERNAL MIC] knob all the way counterclockwise to lower the
volume level completely.
NOTE
The internal microphones are sensitive enough to pick up
sounds of the VR-3EX's buttons and faders being operated.
3.
Turn the HDMI [1] through [4] knobs to adjust the volume
level of HDMI audio.
When you aren't using HDMI audio, turn the [HDMI] knobs all the
way counterclockwise to lower the volume level completely.
You can check the level meter at the bottom of the screen to
determine whether the volume has been adjusted to a suitable
level. A level where indicators "-18" through "-6" light up when peak-
volume audio is input is appropriate.
Input audio
OVER
-6 dB
-18 dB
-30 dB
-48 dB
Output audio
Adjusting the Volume Level of Main
Output Audio
This adjusts the volume level of the main output audio.
1.
See the level meter to check the volume level of the main
output audio.
Excessive
Suitable
Insufficient
If OVER lights up, the volume level is excessive.
If only the indicators up to -48 or -30 light up, the volume level is
insufficient.
2.
Move the [MAIN] fader to adjust the volume level.
A level where indicators "-18" through "-6" light up when peak-
volume audio is input is appropriate.
NOTE
If the volume level of speaker output is not suitable even after
adjustment so that -18 to -6 light up, adjust the volume for the
speakers or the amplifier. Using the [MAIN] fader to carry out
further adjustment might result in distortion or degradation of
sound quality
Adjusting the Volume Level of USB
Output Audio
This adjusts the volume level of audio output from the USB port.
1.
Turn the [USB LEVEL] knob.
Audio Operations
35