Rear Panel/Side Panel - Roland VR-3EX Owner's Manual

Panel Descriptions

Rear Panel/Side Panel

1
No. Name
1
[POWER] Switch
2
AC Adaptor Jack
3
Power Cord Hook
4
Audio Output Connectors
5
Video Output Connectors
6
Video Input Connectors 1–4
7
Audio Input Connectors 1–7/8
8
8
USB port
10
3 4
5
2 8 9
Explanation
This turns the power to the VR-3EX on and off.
This is for connecting the included AC adaptor.
Use this to secure the AC adapter cord in place.
These output the results of audio mixing. Here you connect a video recorder or other recording equipment, or an
amplifier or speakers.
* The VR-3EX has two internal audio buses (the MAIN bus and the AUX bus), and you can select the audio bus to
output for each individual connector.
• AUDIO OUT Connectors (L, R)
These accept RCA phono type plugs.
• AUX OUT Connectors (L, R)
These accept 1/4-inch phone type plugs.
These output the results of video mixing (main output video).
• VIDEO output Connector
Here you can connect a video monitor, recording unit, or other device equipped with a composite input connector.
* You can also output the incoming video on video channels 1 through 4 as a four-way split screen.
• RGB/COMPONENT Output Connector
Here you connect equipment such as a projector or recording unit that is equipped with an analog RGB/compo-
nent input connector.
• HDMI Output Connector
Here you connect an external display or other device equipped with an HDMI input connector.
These are for inputting video signals from a computer or video devices such as video cameras and DVD players.
• VIDEO Input Connectors (video channels 1–4)
Here you connect video cameras, DVD players, and other devices equipped with composite output connectors.
• RGB/COMPONENT Input Connector (video channel 4)
Here you connect a device such as a computer that is equipped with an analog RGB/component output connector.
• HDMI Input Connectors (video channels 1–4)
Here you connect video cameras and other devices equipped with HDMI output connectors.
* You can specify the video input connector assigned to each individual video channel.
These are for inputting audio signals from video decks, microphones, audio mixers, and other such audio equipment.
You can connect video decks, CD players, microphones, and other devices.
• AUDIO INPUT (XLR/TRS) Connectors 1–4
These accept XLR and TRS 1/4-inch phone type plugs. Input via XLR/TRS connectors 1 through 4 is assigned to
audio channels 1 through 4.
* You can supply phantom power (+48 V) from the XLR connectors.
• AUDIO IN 5/6 Connectors (L, R)
These accept RCA phono type plugs. Input via the AUDIO IN 5 and 6 connectors is assigned to audio channel 5 and 6.
• AUDIO IN 7/8 Connector (L, R)
This accepts a miniature stereo phone plug. Input via the AUDIO IN 7/8 connector is assigned to audio channels 7
and 8.
• This outputs the results of video and audio mixing. You can connect a computer and send video and audio over the
Internet, or record it on the computer.
* You can also output the incoming video on video channels 1 through 4 as a four-way split screen.
• You can use VR-3EX RCS dedicated software to operate the VR-3EX remotely from a connected computer.
6 4 7
10
Page
p. 17
p. 16
p. 15
p. 14
p. 15
p. 16
p. 41