Rear Panel - Roland SR-20HD Startup Manual

Direct streaming av mixer
Hide thumbs Also See for SR-20HD:
Table of Contents

Advertisement

Panel Descriptions

Rear Panel

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
1
DC IN jack
Connect the included AC adaptor to this jack.
* Use the cord hook to secure the cord of the AC
adaptor as shown in the illustration.
2
[POWER] switch
Turns the power on/off.
3
USB CONTROL port
¹ You can connect your smartphone to this port and use it for tethering.
¹ Connect a USB flash drive to import still images, or connect a USB
keyboard for inputting text.
4
USB VIDEO IN port
Connect a USB-compatible Web camera here.
5
LAN (DIRECT STREAM) port
Connect this port to a network device for livestreaming.
NOTE
As this port supports GbE, use a LAN cable with a CAT5e
specification or better.
6
HDMI OUT (MAIN, PVW) connectors
These connectors output video.
Connect external displays and projectors.
* You can also configure the menu (p. 7) settings to make the menus
that appear on this unit's display also appear on the display that's
connected to the HDMI OUT PVW connectors.
7
HDMI IN 1, 2 connectors
These connectors input video.
Connect a video camera or computer with an HDMI output
connector here.
4
3
10
1
2
4
5
Cord hook
8
9
6
7
8
AUDIO OUT (LINE OUT) jacks
These jacks output audio.
Connect them to an audio recorder, amplifier, speakers, or other
such equipment.
9
AUDIO IN 1–4 (XLR/TRS) jacks
These jacks input audio.
Connect a mic or line-level analog audio equipment here.
* Pin assignment of AUDIO IN 1–4 (XLR/TRS) jacks
2: HOT
3: COLD
About phantom power
*
You can supply phantom power (+48 V) from the AUDIO IN 1–4
jacks (XLR). Turn on phantom power when you're using a condenser
microphone that requires phantom power.
Use the [MENU] button
set "PHANTOM +48 V" to "On".
AUDIO IN 5/L, 6/R (LINE IN) jacks
These jacks input audio.
Connect analog audio equipment such as an audio mixer here.
10
Ground terminal
Connect this to an external earth or ground if necessary.
TIP:
1: GND
RING:
SLEEVE: GND
Ó
Ó
"Audio Input"
"AUDIO IN 1"–"AUDIO IN 4"
HOT
1: GND
COLD
3: COLD
Ó

Advertisement

Table of Contents
loading

Table of Contents