Multi-Function Gigabit Wireless-N Client Bridge
Version 1.0
3.5.2 Power Saving
Click on the Power Saving link in the navigation menu. This page allows you to
enable power saving on the wired and wireless interface.
WLAN: Choose to Enable or Disable the wireless LAN power saving model.
Ethernet: Choose to Enable or Disable the Ethernet (wired) power saving mode.
Click on the Apply button to save the changes.
3.5.3 Diagnosis
Click on the Diagnosis link in the navigation menu. This page allows to Ping a
device to check if it is active.
Address to Ping: Specify the IP address to ping and then click on the Start button.
The result will then display in the field below.
3.5.4 Reset
Click on the Reset link in the navigation menu. This page allows resetting the device
with its current settings. Click on the Apply button to reset the device.
65