EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual page 25

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0
Setup button on the device. The device acts as a registrar for the network, although
other devices may act as a registrar as well.
Wi-Fi Protected Setup is a feature that locks the wireless security settings and
prevents the settings from being changed by any new external registrar using its PIN.
Devices can still be added to the wireless network using Wi-Fi Protected Setup.
WPS: Place a check in this box to
enable this feature.
WPS Current Status: Displays the current status of the WPS configuration.
Self Pin Code: Displays the current PIN.
SSID: Displays the current SSID.
Authentication Mode: Displays the current authentication mode.
Passphrase Key: Displays the current passphrase.
Interface: Displays the current interface.
WPS Via Push Button: Click on the Start to Process button if you would like to
enable WPS through the Push Button instead of the PIN. After pressing this button
you will be required to press the WPS on the client device within two minutes. Click
on the OK button in the dialog box.
WPS via PIN: Specify a PIN, which unique number that can be used to add the
router to an existing network or to create a new network. Then click on the Start to
Process button.
Click on the Apply button to save the changes.
25