Snmp; Firmware Upgrade - EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0
3.4.2

SNMP

Click on the SNMP link on the Management navigation drop-down menu. This option
allows you to assign the contact details, location, community name and trap settings
for SNMP. This is a networking management protocol used to monitor network-
attached devices. SNMP allows messages (called protocol data units) to be sent to
various parts of a network. Upon receiving these messages, SNMP-compatible
devices (called agents) return data stored in their Management Information Bases. .
SNMP Active: Choose to enable or disable the SNMP feature.
SNMP Version: You may select a specific version or select All from the drop-down
list.
Read Community Name: Specify the password for access the SNMP community for
read only access.
Set Community Name: Specify the password for access to the SNMP community
with read/write access.
System Location: Specify the location of the device.
System Contact: Specify the contact details of the device.
Send SNMP Trap: Specify the IP address of the computer that will receive the
SNMP traps.
Trap Active: Choose to enable or disable the SNMP trapping feature. .
Trap Manager IP: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.

3.4.3 Firmware Upgrade

Click on the Firmware link in the navigation menu. This page allows you to upgrade
the firmware of the device in order to improve the functionality and performance.
61