Ap Profile - EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0
Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID
broadcast feature.
When this option is set to Enable, your wireless network name is
. If you're not using encryption then
broadcast to anyone within the range of your signal
they could connect to your network. When this is disabled, you must enter the
Wireless Network Name (SSID) on the client manually to connect to the network.
WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS)
feature for prioritizing voice and video applications. This option can be further
configured in WMM under the Wireless drop-down menu.
Encryption: Select WPA pre-shared key from the drop-down list.
WPA Mode: Select the Auto WPA / WPA2 from the drop-down list.
WPA Type: Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to
secure the data communication. TKIP (Temporal Key Integrity Protocol) provides
per-packet key generation and is based on WEP. AES (Advanced Encryption
Standard) is a very secure block based encryption. Note that, if the bridge uses the
AES option, the bridge can associate with the access point only if the access point is
also set to use only AES.
RADIUS Server IP Address: Specify the IP address of the RADIUS server.
RADIUS Server Port: Specify the port number of the RADIUS server, the default
port is 1812.
RADIUS Server Password: Specify the pass-phrase that is matched on the RADIUS
Server.
Click on the Apply button to save the changes.

3.2.5.3.4 AP Profile

Click on the AP Profile link under the Wireless drop-down menu.
This page allows you to configure the profile of the Client Bridge exactly the same as
the Access Point.
SSID: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Encryption: Select WPA pre-shared key from the drop-down list.
WPA Type: Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to
secure the data communication. TKIP (Temporal Key Integrity Protocol) provides
per-packet key generation and is based on WEP. AES (Advanced Encryption
Standard) is a very secure block based encryption. Note that, if the bridge uses the
AES option, the bridge can associate with the access point only if the access point is
also set to use only AES.
34