Advanced - EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual

Multi-Function Gigabit Wireless-N Client Bridge
•
Band: Select the IEEE 802.11 mode from the drop-down list. For example, if you are
sure that the wireless network will be using only IEEE 802.11g clients, then it is
recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select 802.11B+G+N. If all of the
wireless devices you want to connect with this router can connect in the same
transmission mode, you can improve performance slightly by choosing the
appropriate "Only" mode. If you have some devices that use a different transmission
mode, choose the appropriate "Mixed" mode.
•
ESSID#
: This device allows up for four SSIDs, select the SSID# that you would like to
configure from the drop-down list.
MAC Address #: Specify the MAC address (BSSID) of up to four devices within the
WDS.
Click on the Apply button to save the changes.

3.2.5.5.3 Advanced

Click on Advanced link under the Wireless drop-down menu. This page allows you
to configure the fragmentation threshold, RTS threshold, beacon period, transmit
power, DTIM interval, etc.
Version 1.0
47