EnGenius 11N Wireless Gigabit Multi-Function Client Bridge User Manual page 31

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0
HEX for use over the network. Four keys can be defined so that you can change
keys easily. A default key is automatically generated when WEP is enabled.
ESSID Selection: As this device supports multiple SSIDs, it is possible to configure
a different security mode for each SSID (profile). Select an SSID from the drop-down
list.
Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID
broadcast feature.
When this option is set to Enable, your wireless network name is
. If you're not using encryption then
broadcast to anyone within the range of your signal
they could connect to your network. When this is disabled, you must enter the
Wireless Network Name (SSID) on the client manually to connect to the network.
WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS)
feature for prioritizing voice and video applications. This option can be further
configured in WMM under the Wireless drop-down menu.
Encryption: Select WEP from the drop-down list.
Authentication Type: Select Open, or Shared Key. Authentication method from the
drop-down list. An open system allows any client to authenticate as long as it
conforms to any MAC address filter policies that may have been set. All
authentication packets are transmitted without encryption. Shared Key sends an
unencrypted challenge text string to any device attempting to communicate with the
AP. The device requesting authentication encrypts the challenge text and sends it
back to the access point. If the challenge text is encrypted correctly, the access point
allows the requesting device to authenticate. It is recommended to select Auto if you
are not sure which authentication type is used.
Key Length: Select a 64-bit or 128-bit WEP key length from the drop-down list.
Key Type: Select a key type from the drop-down list. 128-bit encryption requires a
longer key than 64-bit encryption. Keys are defined by entering in a string in HEX
31