Wireless 11N USB Adapter Table of Contents INTRODUCTION..........................3 1.1. & B ........................ 4 EATURES ENEFITS 1.2. USB A ....................... 4 DAPTER ESCRIPTION 1.3....................... 6 YSTEM EQUIREMENTS 1.4..........................6 PPLICATIONS INSTALLATION FOR WINDOWS (7/VISTA/XP/2000)..............7 2.1........................7...
Once you are connected, you can do anything, just like the wired network. This USB client adapter operates seamlessly in 2.4GHz frequency spectrum supporting the 802.11b, 802.11g, and 802.11n wireless standards. It’s the best way to add wireless capability to your existing wired network or simply surf the web.
Wireless 11N USB Adapter 1.1. Features & Benefits Features Benefits Racing Speed up to 150Mbps data Enjoy the Internet connection in crazy- rate (2.4GHz 11N technology) fast speed, without the bottleneck of stringing wires. Advanced power management Low power consumption WPA/WPA2 (IEEE 802.11i), WPA-...
Page 5
Wireless 11N USB Adapter EUB9603H Antenna RSMA connector...
Wireless 11N USB Adapter 1.3. System Requirements The following are the minimum system requirements in order to use the USB adapter. PC/AT compatible computer with a USB interface. Windows 7/Vista/XP or Mac OS operating system. 30MB of free disk space for installing the USB adapter driver and utility program.
Wireless 11N USB Adapter 2. Installation for Windows (7/Vista/XP/2000) 2.1. Before You Begin During the installation, XP may need to copy systems files from its installation CD. Therefore, you may need a copy of the Windows installation CD at hand before installing the drivers.
Page 8
Wireless 11N USB Adapter Wait for a few seconds until the driver and client utility is installed. The installation is complete. Click on the Finish button. Carefully insert the USB adapter into the USB port. Windows will then detect and install the new hardware.
Wireless 11N USB Adapter 2.3. General This page delivers information of Status, Speed, Type, Encryption, SSID, Signal Strength and Link Quality. Click on Renew IP to re-establish wireless connection with the chosen AP.
Wireless 11N USB Adapter 2.4. Profile Options: Show Tray Icon: show/hide Utility icon in system tray. Radio Off: temporary turn off wireless radio Disable Adapter: temporary disable wireless adapter Windows Zero Config: switch to Windows default wireless configuration tool...
Page 11
Wireless 11N USB Adapter Functional Button: Add: Manual to key in Profile name, SSID and encryption keys as below.
Page 12
Wireless 11N USB Adapter Edit: You can modify the configuration and settings.
Page 13
Wireless 11N USB Adapter Duplicate: to clone a profile.
Page 14
Wireless 11N USB Adapter Set Default: Reset all saved setting.
Wireless 11N USB Adapter 2.4.1. Available Network This tab allows user to scan APs in proximity. The information includes SSID, Channel, Encryption, Authentication and signal. Refresh: Scan available networks again. Add to Profile: Select any available SSID to save in profiles.
Wireless 11N USB Adapter 2.5. Status In Status tab, you can find the information, included Manufacturer, NDIS Driver Version, Radio Header, Encryption type, Authenticate type, Channel Set, MAC Address, Data Rate, Channel used, SSID, Network Type and so on.
Wireless 11N USB Adapter 2.7. Wi-Fi Protected Setup There are two ways to setup connection through WPS. Pin Input Config (PIN): enter PIN code to establish connection Push Button Config (PBC): this is the software button for WPS button PIN Input Config: Click on the button to start the PIN code process If select Yes, AP scanning will run automatically.
Page 19
Wireless 11N USB Adapter Select the target AP, Choose one AP to key in PIN code. Enter generated PIN code in AP your selected. The synchronization will start shortly. Press WPS Button on USB directly and then click the button “Push Button...
Page 20
Wireless 11N USB Adapter Push Button Config: Click on the [Push Button Config] button Press WPS button on the AP The connection will be established in a few seconds..
Wireless 11N USB Adapter 3. Installation for Mac OS 3.1. Installing the Drivers Follow the steps below in order to install the USB adapter drivers: 1. Insert the CD that was provided to you in this package. The setup should run automatically.
Page 22
Wireless 11N USB Adapter 5. License stage: You can choose the language and then click on the Continue button to configure the next step. After click on the Continue button, a agreement window will be opened for your confirm. Click on the Agree button to configure the next step.
Page 23
Wireless 11N USB Adapter 6. Installation Type stage: Click on the Install button to install the driver on Macintosh HD. Click on the Continue Installation to configure the next step.
Page 24
Wireless 11N USB Adapter 7. Summary stage: The installation is complete. Click on the Restart button. 8. Carefully insert the USB adapter into the USB port. MAC OS X will then detect and install the new hardware.
Page 25
You can find the logo and there are some windows with message. (1) If click Network Preference, you can configure the network setting for MAC OS. (2) Click OK to enable EnGenius wireless LAN card and open utility to configure. 9. The Client Utility is installed in the Applications folder.
Wireless 11N USB Adapter 3.2. WLAN Client Utility - Link Status The Link Status tab displays the current status of the wireless radio. following information is included in this tab, as the image depicts below. MAC Address: This displays the MAC address of EUB-9703 SSID: Show the SSID what you select to connect.
Wireless 11N USB Adapter 3.3. WLAN Client Utility - Profiles The Profile tab is used to store the settings and configurations of multiple Access Points for different application. In the profiles table, it list all saved profiles and some information, included Profiles Name, SSID, Network Type. You can click Add to add a new profile, or click Remove to delete a profile.
Wireless 11N USB Adapter 3.3.1. Profile Properties When adding a profile you are required to enter a profile name and SSID as well as configure the network type and encryption/authentication settings. A profile can be configured as Infrastructure or Ad-hoc mode. The configuration settings for each mode are described below.
Page 29
Wireless 11N USB Adapter other client and does not require an access point. This is the easiest and least expensive way for the SOHO to set up a wireless network). Wireless Network Security Properties Network Authentication: It allows you to configure 3 kinds of...
Page 30
Wireless 11N USB Adapter Network Authentication: Select OPEN_SYSTEM or SHARED_KEY from the drop-down list. Data Encryption: Select WEP from the drop-down list. ASCII: You can type the WEP key, 5 or 13 character string, into the field when you enable this.
Page 31
Wireless 11N USB Adapter Network Authentication: Select WPA2_PSK from the drop-down list. Data Encryption: Select TKIP or AES from the drop-down list. Network Key: Enter a WPA Pre-shared key which is between 8 and 32 characters long. Confirm network Key: Type your network key again for confirmation.
Wireless 11N USB Adapter 3.4. WLAN Client Utility - Available Network The Available Network displays a list of Access Points in the area, and allows you to connect to a specific one. The following information is included in this tab, as the image depicts below.
Wireless 11N USB Adapter Appendix A – FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless 11N USB Adapter Appendix B – IC Interference Statement Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.