Framing And Clearances; Selecting Appliance Location - Heat & Glo Escape-36DV Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
Figure 3.1 Appliance Locations
F
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
A
Inches 51-1/2
Millimeters 1308
Heat & Glo • Escape-36DV • 2012-900 • Rev. AA • 04-08
Note: For actual appliance dimensions refer to Sec-
tion 16.
B
A
E
B C D E
22 46-3/4 66 93-3/8 7-1/2
559 1187 1676 2372
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
D
C
F
190
7