Taking Pictures In Full-Auto - Minolta Maxxum Dynax 7 User Manual

TAKING PICTURES IN FULL-AUTO

1. Turn the main switch to ON.
2. While pressing the exposure-
mode dial lock-release button,
set the exposure-mode dial to
Full-auto is shown in the display. When the
upper part is black, as shown, the position of
the dials and levers may not match the actual
camera control.
3. Raise the built-in flash.
• If the flash is raised, it will automati-
cally fire when needed.
• For details on using the built-in flash,
see page 31.
24
full-auto.
4. If using a zoom lens, rotate the
zooming ring to frame your
subject as desired.
5. Center your subject in the
focus frame.
6. Press the shutter-release but-
ton partway down.
• Focus will be set automatically.
• Audio sounds and the local focus
area LED appears briefly indicating
the focus area selected by the cam-
era.
7. When or appears in the
viewfinder, press the shutter-
release button all the way
down to take the picture.
• Use focus lock (p.29) if your subject
is outside the focus frame.
25