Display Brightness/Contrast; Focusing - Minolta Maxxum Dynax 7 User Manual

DISPLAY BRIGHTNESS AND CONTRAST
Display Illumination
If desired, the display can be illuminated.
Press the navigation display illu-
minator.
• The display illuminator shuts off
approximately 5 seconds after the last
camera operation.
• If the button is pressed again before
the 5 seconds, it will shut off.
Display Contrast
The contrast level of the display is adjustable.
1. Press the display selection but-
ton for 3 seconds to select the
contrast set display.
2. Turn either the front or rear-
control dial to adjust the con-
trast intensity.
• The contrast display will disappear when the shutter-release but-
ton is pressed partway down.
44
• The contrast set display
appears.
• Turning the dial in the +
direction increases the
intensity.

FOCUSING

Your camera features complete
focus control, utilizing a newly
developed 9-point autofocus sys-
tem with center dual cross-hair
sensors to give great flexibility
when composing photographs,
and the ability to switch between
AF and MF using the AF/MF con-
trol button without changing hold-
ing positions.
The location of the film
plane is indicated by
the arrow.
45