Minolta Maxxum Dynax 7 User Manual page 14

TAKING PICTURES IN FULL-AUTO
• The number of frames remaining is displayed in the
viewfinder for the last 19 frames on the roll. This
countdown does not appear for non-DX-coded film.
• You can not take more pictures on a roll than what is stated on the
film cartridge.
• Audio sound can be canceled (p 131).
• After taking picture, turn the camera
off.
• After the camera is turned off, the
frame counter remains displayed in the
top data panel, but not in the rear navi-
gation display.
• The frame counter in the top data
panel disappears when the main switch
is turned on.
Full-Auto Basic Settings
When the exposure-mode dial is set to
below are reset to the full-auto mode, and locked in order not to be
changed.
Function Full-Auto Settings
Exposure mode Program (P)
Metering mode 14-segment honeycomb-pattern
Autoflash, if the built-in flash is up.
(Pre-flash for red-eye reduction fires in
Flash mode
accordance with the position of the
flash-mode switch).
Focus mode AF-A, Autofocus priority
AF area Wide focus area
Drive mode Single frame advance
26
, the functions in the table
Page No.
61
74
99
46
54
87
Function Full-Auto Settings
Exposure
+/- 0.0EV
compensation
Flash
+/- 0.0EV
compensation
P /P creative
A S
Cleared
program mode
Flash-metering ADI (Advanced Distance Integration)
method 4-segment metering
• When the exposure-mode dial is set to
above are reset to full-auto mode, and locked in order not to be
changed. However, if Custom 24-2 (p. 178) is selected, these settings
can be changed after the dial is set to
• The following items will not be reset when the exposure-mode dial is
set to . Additional changes to these can be made after selecting
- Whether built-in flash fires or not
- Red-eye reduction
- Date and time imprinting
- Data memory
- Eye-start
- ISO setting
- Audio sound setting
- Custom function settings, except for custom functions 1, 20, 21, 22
and 23.
Page No.
77
103
62
108
, the functions in the table
.
.
27