Minolta Maxxum Dynax 7 User Manual page 21

DISPLAY SELECTION
Meter-Index Display
The meter index display shows the values of compensation and
bracketing that you have selected. The lower part shows compen-
sation/bracketing with flash. The upper part of the display is shown
in both the viewfinder and the navigation display.
Current exposure information
The metering index display contains the following:
Exposure compensation (p. 77)
Flash compensation (p. 103)
Metered manual value (p. 71)
Exposure bracketing (p. 92)
Flash bracketing (p. 104)
When AEL appears, EV difference between the AE locked and cur-
rent exposure value. (p. 83)
• or appears if the index is
more than +/- 3.0 EV.
• To cancel this display, select Custom 30-2 (p. 185).
40
Exposure-History Display
The exposure data for the next frame appears in the top of the dis-
play, followed by the those of the last 5 frames.
Top left part usually shows frame counter, but changes when multi-
ple exposure drive mode or STF is selected:
, ..: When in multiple-exposure mode.
: When in STF mode.
Shutter speed
Aperture
Exposure compensation
Next frame's exposure data.
Previous 5 frames' exposure data
• Displays present frame count.
• If there is no film in the camera, there will be no display.
• In this display, the imprint indicator
and the audio indicator
• After 5 exposures, whenever the shutter is released, the oldest
exposure data is deleted.
• For multiple exposures, the history shows the data of every exposure.
• Exposure-history is cleared by the replacement of the battery.
• To cancel this display, select Custom 31-2 (p. 185).
, data memory ON indicator
will not appear.
41