Fully-Automatic Operation; Taking Pictures In Full-Auto - Minolta DYNAX 505si SUPER Instruction Manual

FULLY-AUTOMATIC
OPERATION
Full-Auto is the camera's
standard operating mode and
is suited for use in almost any
situation. When selected, the
camera sets the focus and
exposure automatically and
fires the built-in flash when
necessary.
Use Full-Auto when you are
just starting out or when
shooting under conditions that
would require you to constantly
adjust the focus and/or
exposure.

TAKING PICTURES IN FULL-AUTO

1. Slide the main and eye-start
switches to ON.
2. Press the program-reset
button to set the camera to
Full-Auto.
• The camera will return to its default
settings (p83).
3. If using a zoom lens, rotate
the lens' zooming ring to
frame the subject as desired.
4. Center your subject in the
focus frame [ ].
•
when focus is confirmed.
• If
shutter-release button partway down to
pop-up the built-in flash.
then reappear when the flash is charged.
or will appear in the viewfinder
appears in the viewfinder, press the
will disappear,
Continued on next page.
21