Figure 4-20. Removing And Replacing The Chassis Fans 0 And 1 - HP Integrity rx4640 User's & Service Manual

Removing and Replacing Components
Removing and Replacing Hot-Swap Chassis Fans
Step 3. Grasp the fan unit locking handle, tilt it up, and pull out the fan from the chassis.
Figure 4-20 Removing and Replacing the Chassis Fans 0 and 1
NOTE
64
When one fan unit is removed from the server, the remaining fan units operate at
full speed for two minutes. After two minutes the server goes into soft-shutdown
mode.
Chapter 4