Autoboot Configuration; Driver Configuration - HP Integrity rx4640 User's & Service Manual

For example:
Manage BootNext setting. Select an Operation
EFI Shell [Built-in]
Current OS
Reset BootNext Setting
Save Settings to NVRAM
Help
Exit
VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)
Boot0000

AutoBoot Configuration

Use this option to set the amount of time the server pauses before attempting to launch the first item in the
Boot Options list.
For example:
Set Auto Boot Timeout. Select an Option
Set Timeout Value
Delete/Disable Timeout
Help
Exit
Interrupting the timeout during the countdown stops the Boot Manager from loading any boot options
automatically. If there is no countdown, boot options must be selected manually.
• To set the auto boot timeout value, in seconds, select Set Timeout Value and enter the desired value.
• To disable the timeout function, select Delete/Disable Timeout.
NOTE When this option is selected, the server does not automatically boot. The server stops at the
EFI boot menu and waits for user input.

Driver Configuration

Use this option to define the devices that display output from the system console. This list normally includes
the VGA monitor and a serial port for directing output to a terminal emulation package.
NOTE If you install a modem in your server, make sure you disable the modem serial port in both the
Active Console Input and Active Console Output device lists.
Some operating systems support multiple consoles, such as a simultaneous serial and VGA
NOTE
output. See your OS documentation to determine how many consoles are supported with your
server. Multiple consoles are not supported for HP-UX or Windows (use the Smart Setup CD to
switch between COM A and the iLO MP on Windows systems).
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
Appendix C
Using the Boot Configuration Menu
Utilities
189