Replacing The Processor Extender Board - HP Integrity rx4640 User's & Service Manual

Removing and Replacing Components
Removing and Replacing the Processor Extender Board

Replacing the Processor Extender Board

To replace the processor extender board, follow these steps:
Step 1. Ensure the extraction levers are positioned in the outward, unlocked position.
Step 2. Align the processor extender board with the front and rear card guides.
Step 3. Slide the processor extender board down until it begins to seat in the socket located on the
midplane riser board.
Step 4. Push the extraction levers inward to the locked position in order to fully seat the processor
extender board into the socket on the midplane riser board.
Step 5. Replace the front cover. See "Replacing the Front Cover" on page 43.
Step 6. Replace the front bezel. See "Replacing the Front Bezel" on page 41.
Step 7. If rack mounted, slide the HP server into the rack until it stops. See "Inserting the Server into the
Rack" on page 39.
54
Chapter 4