Figure 4-32 Inserting Scsi I/O Card - HP Integrity rx4640 User's & Service Manual

Step 6. Install replacement SCSI I/O card. Figure 4-32 shows the correct way to install the SCSI I/O card.
CAUTION

Figure 4-32 Inserting SCSI I/O Card

Step 7. Close the blue PCI card latch for slot 1 by twisting it counter-clockwise.
Step 8. Reconnect the internal and external SCSI cable(s) to the SCSI core I/O card.
Step 9. Replace the top cover. See "Replacing the Top Cover" on page 44.
Step 10. Push the HP server back into the rack until it stops. "Inserting the Server into the Rack" on
page 39.
Chapter 4
Always handle I/O cards by their edges. Failure to comply with this precaution may
result in damage to the card.
Ensure that you fully seat the card into the slot or the card may be damaged when
power is re-applied to the slot.
Removing and Replacing Components
Removing and Replacing Core I/O Cards
Back of server
87