Adjusting The Image - Runco Video Xtreme VX-40d Owner's Operating Manual

• AUTO SOURCE: If checked, (default), the projector can automatically locate this
channel when an incoming input signal matches. If not checked, the projector
can locate the selected channel only when it is directly selected via CHANL on
the keypad—and a change in input signal will not result in a channel change.
• LOCKED: If checked, all of the image settings for this channel are disabled. If
unchecked (default), all available image settings can be adjusted as desired. You
cannot use Auto Setup with a locked channel.
• PREVIOUS CHANNEL: Select this option to see or change Channel Edit settings
for the previous channel in the Channel Setup list.
• NEXT CHANNEL: Select this option to see or change Channel Edit settings for
the next channel in the Channel Setup list.
The most commonly used options for image adjustments are accessed through two
menus: Size and Position (MENU 1) and Image Settings (MENU 2), both of which appear
in the Main menu. From either of these two menus, you can change settings affecting the
image from the current channel by working with the appropriate slidebars, checkboxes
and pull-down lists. Exit will return to the previous menu (or to the presentation, if from
the Main menu) and accept any changes you may have entered. Settings are saved with
the current channel.
From your presentation, you can access any of the individual options in these menus by
pressing MENU followed by the appropriate two-digit number representing their location
in the menu system. For example, press MENU 2 3 to quickly access the "Gamma"
option in the Image Settings menu.
Use Auto Setup (AUTO)
For a good and efficient first step in perfecting the image, press FUNCS followed by AUTO
on the remote control. This initiates an automated process in which the projector quickly
optimizes critical display parameters such as size, position and pixel tracking, based on
the type of incoming source data detected. An Auto Setup can save considerable setup
time, and you can still modify the adjustments as desired using menu options described
below.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
39
Section 3: Operation
3.5 Adjusting the
Image
Before You Begin