Runco Video Xtreme VX-40d Owner's Operating Manual page 113

The module receives either composite video or S-video input signals from tape or disk
players (do not connect both types of signals simultaneously). Video inputs are 75Ω
terminated. Video outputs are provided for buffered loop-through to another display
device.
Composite/S-video Features
• BNC connectors for composite RGB signals
• 4-pin mini-DIN connectors for S-Video signals
• buffered loop-through video outputs
NOTES:
1) This interface is not a decoder. NTSC, PAL, or SECAM signals must connect to the
video decoder installed at INPUT 3 / INPUT 4.
2) The audio connectors are not functional.
3) Do not connect both composite video and S-video signals to the Composite / S-
Video Input Module. Connect one or the other, even when plugged into a switcher.
This module can display digital video input signals conforming to the DVI (Digital Visual
Interface) single-channel standard.
Features
• supports Digital Visual Interface (DVI) single-channel
• supports VESA Extended Display Identification Data (EDID™)
®
• provides an active-loop-through using a DVI connector (conforming to the DVI
Specification)
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
105
Appendix D: Optional Input Modules
Composite / S-Video
Input Module
DVI Input Module