Runco Video Xtreme VX-40d Owner's Operating Manual page 45

FUNCTIONS WITHIN THE CHANNEL SETUP MENU — To copy, delete or edit a
channel, highlight the desired channel in the Channel Setup menu and either:
• Press FUNCN (or DIS) if you want to copy the selected channel or delete this
or other channels (refer to Copying or Deleting a Channel, below); or
Press Enter if you want to edit channel setups (i.e., non-image related parameters)
•
for the selected channel. Refer Editing a Channel Setup.
TO COPY A CHANNEL, highlight the desired channel in the Channel Setup menu, then
press DIS to go to the Channel Copy/Delete submenu. Select "Copy" and press Enter.
This creates a new channel that is identical to original -- which remains -- but it is identified
with the next available number from 01 to 50. If you change your mind and do not want to
copy the current channel, press Exit to cancel and return to the previous menu. Copying
channels is a quick way to create numerous channels, each of which can then be edited
and adjusted for a variety of presentations in the future.
TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu,
then press DIS to activate the Channel Copy/Delete submenu. Select "Delete" and press
Enter. A confirmation window appears. Press Enter again to confirm the deletion or
select Cancel if you change your mind.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
Figure 3.10. Copying A Channel
�����
Figure 3.11. Deleting a Channel
37
Section 3: Operation
Copying or Deleting
Channels