Runco Video Xtreme VX-40d Owner's Operating Manual page 37

• INPT6: Press INPT6 to display from the Input 6 interface module installed in
the Option 2 slot.
NOTE: If you have the optional Dual SD/HD-SDI Module installed and there are two
inputs connected to it, the second input is considered INPUT 8. If you are using
the built-in keypad or the remote keypad, press INPUT 6 to access INPUT 8 as
follows:
• While displaying from Input 6, press INPT6 again. This switches to Input 8.
• While displaying from any input other than the Dual SD/HD-SDI Module, press
Input 6. This switches to either Input 6 or Input 8, depending on which of the
Dual SD/HD-SDI Module inputs was last used. Press INPT6 again to display
from the other Dual SD/HD-SDI Module input.
MUTE (Shutter)
Press and hold MUTE on the Theater Master remote for two seconds to toggle the
internal mechanical shutter blade closed or open with a single keystroke.
A closed shutter blanks the display (turns it to black). Close the shutter to mute all
display while maintaining access to projector functions. Opening the shutter restores the
image.
NOTES:
1) "Sh" appears in the LED display when the shutter is closed.
2) The shutter is open upon power-up.
Menu
Press Menu to enter or exit the projector's menu system.
Function (FUNCN / DIS) Key
Note: The FUNCN button (on the FUNCS sub-page in the LCD menu) and the DIS
button (next to "0" on numeric keypad) can be used interchangeably.
IF WITHIN A MENU: Press FUNCN to perform special tasks within the menu system,
as described with the appropriate topic later in this section. For example, press FUNCN
while in the Channel Setup menu to delete or copy a channel.
IF WITHIN A PRESENTATION: Press FUNCN or DIS
followed by a 2-digit number to enable a specific color or
colors in the display (see right). For example, FUNCN 6 4
displays only red and green data and FUNCN 6 7 displays all
color data. Eliminating one or more colors can help with certain
diagnostics and setups, such as when accurately overlaying
one image on top of another from stacked projectors.
NOTE: Color enabling can also be implemented from numerous locations within the
menu system.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
���
���
���
���
���
���
���
29
Section 3: Operation
DIS