Runco Video Xtreme VX-40d Owner's Operating Manual page 39

NOTES:
1) If there is no signal present, all source-dependent adjustments are disabled.
2) After 15 minutes of inactivity, the projector leaves the menu system and returns to
the presentation.
3) The Status menu is read-only.
When finished with a function menu, do one of the following:
• Press Exit to return to the previous screen.
• Press MENU to leave the menu system and return to the presentation.
If at any time you are uncertain what to do next, press HELP to display summary
information about the current menu or highlighted option; see Figure 3.5. Press HELP
again to exit. In addition, a line of "hint" text is included at the bottom of some menus.
From presentation level, press HELP to access general Help Topics (Figure 3.6). Scroll as
necessary within a topic. Press HELP or Exit to return to your presentation.
If a slidebar, menu or message is displayed you have limited time in which to make
a keypad entry before the projector returns to presentation level and the graphic
disappears. These time-outs may vary depending on what is displayed.
Menu options that include this icon apply universally to any incoming
signal.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
Figure 3.5 Context-sensitive Help
Figure 3.6 Accessing General Help Topics
31
Section 3: Operation
Help
Time-outs
The Global Icon