Power Management Setup - ECS G33T-M2 User Manual

34
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-in
card with a remote boot ROM installed.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the
system to detect the presence of USB device at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Onboard 1394 Functions (Enabled) (optional)
Use this item to enable or disable the onboard 1394 function.
Press <Esc> to return to the main menu setting page.

Power Management Setup

This page sets up some parameters for system power management operation.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
ACPI Suspend Type
PWRON After PWR-Fail
Power On by Ring
Wake-Up by PME
Resume on RTC Alarm
PS2 Keyboard PowerOn by S3
PS2 Mouse PowerOn by S3
USB Device Wakeup From S3
Soft-off by PWR-BTTN
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3, the suspend mode is a
suspend to RAM, i.e, the system shuts down with the exception of a refresh current to the
system memory.
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating status.
Power On by Ring (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem. You must use an ATX
power supply in order to use this feature.
Power Management Setup
S3 (STR)
Power Off
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Instant Off
: Move Enter : Select +/-/: Value
F9: Optimized Defaults
F1:General Help
Using BIOS
Help Item
Select the ACPI
state used for
System Suspend.
F10: Save ESC: Exit