Load Default Settings; Supervisor Password - ECS G33T-M2 User Manual

38
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Memory Voltage (1.9V)
This item allows users to adjust the DDR memory voltage.
Press <Esc> to return to the main menu setting page.

Load Default Settings

This option opens a dialog box that lets you install optimized defaults for all appropriate
items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press
<N> and then <Enter> to not install the defaults. The optimized defaults place de-
mands on the system that may be greater than the performance level of the components,
such as the CPU and the memory. You can cause fatal errors or instability if you install
the optimized defaults when your hardware does not support them. If you only want to
install setup defaults for a specific option, select and display that option, and then press
<F7>.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Change Supervisor Password
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
:Not Installed
Press Enter
: Move Enter : Select +/-/: Value
F1:General Help F9: Optimized Defaults
Using BIOS
Help item
Install or Change the
password.
F10: Save ESC: Exit