Advanced Chipset Setup - ECS G33T-M2 User Manual

32

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
Share Memory Size
DVMT Mode Select
DVMT/FIXED Memory
Memory Remap Feature
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and we
recommend users leave the setting unchanged. Modify it at will may cause the system to be
unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded in SPD
during system boot up.
Share Memory Size (Enabled, 8MB)
This item lets you allocate a portion of the main memory for the onboard
VGA display application.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
DVMT/FIXED Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the system
memory as graphics memory, according to system and graphics requirements.
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 4 GB of RAM.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
Enabled, 8MB
DVMT Mode
256MB
Enabled
: Move Enter : Select +/-/: Value
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Options
Auto
667 MHz
800 MHz
F10: Save ESC: Exit