Cpu Installation Procedure - ECS G33T-M2 User Manual

14

CPU Installation Procedure

The following illustration shows CPU installation components.
A. Read and follow the instructions shown on the
sticker on the CPU cap.
B. Unload the cap
· Use thumb & forefinger to hold the
· Lift the cap up and remove the cap
C. Open the load plate
· Use thumb & forefinger to hold the
· Lift up the lever.
· Use thumb to open the load plate. Be
D. Install the CPU on the socket
· Orientate CPU package to the socket.
E. Close the load plate
· Slightly push down the load plate onto the
· CPU is locked completely.
F. Apply thermal grease on top of the CPU.
G. Fasten the cooling fan supporting base onto
the CPU socket on the motherboard.
H. Make sure the CPU fan is plugged to the
CPU fan connector. Please refer to the CPU
cooling fan user's manual for more detail
installation procedure.
1. To achieve better airflow rates and heat dissipation, we suggest that you
2. DO NOT remove the CPU cap from the socket before installing a CPU.
3. Return Material Authorization (RMA) requests will be accepted only if the
motherboard comes with thecap on the LGA775 socket.
lifting tab of the cap.
completely from the socket.
hook of the lever, pushing down and pulling
aside unlock it.
careful not to touch the contacts.
Make sure you match triangle marker
to pin 1 location.
tongue side, and hook the lever.
use a high quality fan with 3800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink sup
plied. The form and size of fan/heatsink may also vary.
Installing the Motherboard