Advanced Chipset Setup - ECS A790GXM-A Manual

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Internal Graphics Mode
GFX Clock Override
Share Memory Size
SIDEPORT Clock Speed
Init Display First
DCT Unganged Mode
HDMI Audio
: Move Enter : Select
F1:General Help
Internal Graphics Mode (UMA+SIDEPORT)
Use this item to choose the onboard VGA mode. You can select [Disabled] to disable
the onboard VGA, [UMA] to use the system memory, [SIDEPORT] to use the
onboard memory or [UMA+STDEPORT] to use both of the system memory and
onboard memory.
Warning: If Disabled Internal Graphics Mode, please Loading default to
Enable it.
GFX Clock Override (Disabled)
Use this item to enable or disable GFX Clock Override.
Share Memory Size (Auto)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
SIDEPORT Clock Speed (400MHz)
This item allows you to adjust the onboard memory (SIDEPORT) clock speed, and it
is available for over-clocking or under-clocking.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
DCT Unganged Mode (Enabled)
This item is used to select the DCT mode (DRAM Controller mode).
HDMI Audio (Enabled)
This item is used to enable or disable the NB HDMI audio support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
UMA+SIDEPORT
Disabled
Auto
400MHz Disabled
PCI UMA
UMA+SIDEPORT
Enabled
Enabled
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
37
Help Item
Options