CRS-170A L-Band 1:1 Redundancy Switch
Modem and Switch Configuration
3.7
CDM-600L (CLM-9600L) Operation in 1:1 Redundancy
CLM‐9600L Open Network Satellite Modem Installation and Operation Manual
(CEFD P/N MN/CLM9600L.IOM)
The CDM‐600L (CLM‐9600L) Open Network Satellite Modems need no unique special
1:1 configuration settings. However, for correct operation of the CRS‐170A, the
CDM‐600Ls must have the following installed:
•
•
If the modems do not meet this requirement, contact Comtech EF Data. Firmware
updates are free and may be downloaded from the CEFD web page. Hardware
revision upgrades must be performed at CEFD.
3.8
SDM-300L3 Operation in 1:1 Redundancy
SDM‐300L3 Satellite Modem Installation and Operation Manual
(CEFD P/N MN/CLM9600L.IOM)
The SDM‐300L3 Satellite Modems need no unique special 1:1 configuration settings.
However, for correct operation of the CRS‐170A, the SDM‐300L3 must have the
following installed:
•
•
If the modems do not meet this requirement, contact Comtech EF Data. Firmware
updates are free and may be downloaded from the CEFD web page. Hardware
revision upgrades must be performed at CEFD.
Firmware Version 1.1.4 (or higher)
Hardware Revision 3
Firmware Version 1.1.4 (or higher)
Hardware Revision 3
3–15
Revision 9
MN/CRS170A.IOM