Cabling With Cdm-570 - Comtech EF Data CRS-180 Manual

INSTALLATION
CRS-180 IF 1:1 Redundancy Switch
2.3 C
ABLING
Notes:
1. KT/10553-1 is a G.703 Balanced 1:1 Y-Splitter and G.703 Unbalanced 1:1 Y-Splitter
are not shown. This kit also is part of KT/11569-1/
2. KT/11569 is a kit containing the CRS-180, cables an transformers indicated in the
Figure 3.
Figure 3 shows how to connect a pair of CDM-570 modems together with the CRS-180
via KT/11569. The data cable Y-adapter required for the installation depends on the users
data interface, and must be specified at the time of order.
W CDM-570
ITH
2–5
MN/CRS180.IOM
Revision 0