5. Basic parameters
Before you operate the inverter, the parameters that you must first program are the basic parameters.
5.1
Setting acceleration/deceleration time
• Function
1) For acceleration time
0Hz to maximum frequency
2) For deceleration time
maximum frequency
5.1.1
Automatic acceleration/deceleration
This automatically adjusts acceleration and deceleration time in line with load size.
* Automatically adjusts acceleration and deceleration time within the inverter rated current in a range that
goes from 1/8 to infinity of programmed
ginal allowance into consideration.
* Automatically adjusts to the shortest time within 120% of the inverter rated current. It is a value that is ob-
tained attaching importance to acceleration/deceleration time.
Output
frequency (Hz)
Set
: Automatic acceleration/deceleration
: Acceleration time 1
: Deceleration time 1
, program the time that it takes for the inverter output frequency to go from
.
, program the time that it takes for the inverter output frequency to go from
to 0Hz.
When load is small
Acceleration time
Deceleration time
Acceleration/deceleration time
→ decrease
(automatic acceleration/deceleration) to or
and
time. It goes to the optimum value taking a mar-
Output
When load is large
frequency (Hz)
Time (s)
Acceleration time
Acceleration/deceleration time
.
E-1
E6580757
Time (s)
Deceleration time
→ increase
5