8.2
Status monitor mode
8.2.1
In this mode, you can monitor the operation status of the inverter.
To display the operation status during normal operation:
Press the MODE key twice.
Setting procedure (eg. operation at 60Hz)
Item displayed
Output frequency
*
Parameter setting
mode
Direction of
rotation
Frequency
Note 1
command value *
Output current *
Note 2
Note 2
Input voltage *
Note 3
8
Output voltage *
Note 2
Input power *
Output power *
Inverter
load factor *
Output frequency
*
* Monitor items can be selected by setting parameters to , (). Refer to Note 12.
Refer to page H-8 and 9 for notes.
Status monitor under normal conditions
Panel
LED
operated
display
MODE
MODE
k12.3
h11.8
Communic
ation No.
The output frequency is displayed (Operation at
60Hz). (When standard monitor display selection
is set at 0 [output frequency])
The first basic parameter "" (history function)
is displayed.
The direction of rotation is displayed.
FE01
(: forward run, : reverse run)
The frequency command value (Hz/free unit) is
FE02
displayed.
( In case of = )
The inverter output current (load current) (%/A) is
FC02
displayed.
( In case of = )
The inverter Input voltage (DC detection) (%/V) is
FC05
displayed.
( In case of = )
The inverter output voltage (%/V) is displayed.
FC08
( In case of = )
The inverter input power (kW) is displayed.
FC06
( In case of = )
The inverter output power (kW) is displayed.
FC07
( In case of = )
The inverter load factor (%) is displayed.
FE27
( In case of = )
The output frequency (Hz/free unit) is displayed.
FE00
( In case of = )
H-2
E6581611
Description
(Continued overleaf)