Net Routing Protocol_Binding Add/Edit; Routing Protocol_Binding Enable <Row_Id - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
13 pppoe primary_dns
14 pppoe secondary_dns
15 Cancel
16 Exit
11 Save

8.43 net routing protocol_binding add/edit

Sl No Command Name
1 destination_address_end
2 destination_address_start
3 Destination_Network
4 Local_Gateway
5 Service
6 source_address_end
8 source_address_start
9 Source_Network
10 cancel
11 Save
12 show
13 Exit
8.44 routing protocol_binding enable <row_id>
Sl No Command Name
1 row_id
Description
Valid primary DNS Server IP Address
Valid secondary DNS Server IP
Address
Roll back wan configuration changes
Save wan configuration changes and
exit current mode
Save wan configuration changes
Description
Ending IP of the Destination user
Start IP of the Destination user
Destination network type
Local gateway type
Available Service
Ending IP of the Source user
Starting IP of the Source Network
Source network type
. Roll back configuration changes.
Save Protocol-Binding rules
configuration changes
Display system components'
configuration
Save routing protocol binding
configuration and exit current mode
Description
Row Id Of the rule to be enabled
Type and Description
IP Address,
Primary dns
IP address,
Secondary dns
Type and Description
String
String
ANY
SINGLE_ADDRESS
ADDRESS_RANGE
Type:
Dedicated WAN
Configurable WAN
Default service types
String
IP address
String
IP address
ANY
SINGLE_ADDRESS
ADDRESS_RANGE
Type and Description
Unsigned integer
43
CLI Reference Guide