Dot11 Radio Configure <Radio_Num - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
6 preamble_mode <preamble>
7 rts_cts_protection <enabled>
8 rts_threshold <threshold>
9 short_retry_limit <limit>
10 cancel
11 exit
12 save
11.9 dot11 radio configure <radio_num>
Sl No Command Name
1 radio_num
2 channel <channel>
3 channel_spacing <value>
4 country <country>
5 default_transmit_power
<value>
6 operating_frequency <value>
7 cancel
8 exit
9 save
Description
Set the 802.11b preamble type to be
prepended to every frame
Enable/disable RTS/CTS handshake
before packet transmission.
Set the Request to Send (RTS)
threshold.
Set the retry limit for frame
retransmission on transmission failure.
Roll back radio configuration changes
Save radio configuration changes and
exit current mode.
Save radio configuration changes
Description
Radio to configure
Set the channel used by radio.
Select either 20 MHz or 40 MHz
channel bonding (spacing).
Set country.
Set default trans power for APs using
this radio.
Select either 2.4GHz or 5GHz based
on the radio's capabilities and your
wireless network requirements.
Roll back radio configuration changes
Save radio configuration changes and
exit current mode.
Save radio configuration changes
67
CLI Reference Guide
Type and Description
802.11b preamble type to be
prepended to every frame
(Long/Short)
Enable/Disable RTS/CTS
handshake. (Y/N)
Request to Send (RTS) threshold.
Frame re-transmission limit.
Type and Description
Unsigned integer,
Radio number
Unsigned integer,
Channel number (or Auto to let
system select).
Select either 20 MHz or 40 MHz
channel bonding (spacing)
(20MHz/20-40MHz/40MHz)
country name
(USA/INDIA/CANADA/HONG_KO
NG/CHINA/AUSTRALIA/SINGAPO
RE/THAILAND/BRUNEI_DARUSS
ALAM/INDONESIA/NEW_
ZEALAND/PHILIPPINES/VIETNA
M)
Transmitted power level (in %)
(100%/75%/50%/25%/0%)
Select either 2.4GHz or 5GHz
based on the radio's capabilities
and your wireless network
requirements (2.4GH
z/5GHz)