Table of Contents
Advertisement
D-Link
link. The policy route can solve this problem. He/she hopes that all the packets from the General-Manager-Room will pass
through the WAN2 link instead of the default WAN1 link.
7.3
Methods
1. Add a static routing entry to direct the packets towards 140.116.53.0/255.255.255.0 through the WAN2 link.
2. Add a policy routing entry for the packets coming from General-Manager-Room department (192.168.40.192 /
255.255.255.192) through the WAN2 link.
7.4
Steps
7.4.1 Add a static routing entry
Step 1 ¡ Ð
Add a static routing entry
Click the Add button to the next process.
Step 2 ¡ Ð
Fill out the related field
Fill in the destination and the netmask field with
140.116.53.0 and 255.255.255.0. Assign the next
hop Gateway as 61.216.120.148 (the WAN2
IP address). Click Add to proceed.
FIELD
Type
Destination
Netmask
Gateway
Advanced Settings > Routing > Static Route
Advanced Settings > Routing > Static Route > Add
Determine this static routing entry record is multiple hosts (Net) or a single
host (Host)¡ C
The destination IP address of this static routing entry record.
The destination IP Netmask of this static routing entry record.
The default gateway of this static routing entry record.
Table 7-1Add a static routing entry
DESCRIPTION
46
Part II
EXAMPLE
Net
140.116.53.0
255.255.255.0
61.216.120.148
Advertisement
Table of Contents
