System Snmp Sys Configure; System Snmp Trap Configure <Agentip; System Snmp Trap Delete <Agentip - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
8 exit
9 cancel

10.7 system snmp sys configure

Sl No Command Name
1 contact <contact>
2 location <location>
3 name <name>
4 cancel
5 save
6 exit
10.8 system snmp trap configure <agentIp>
Sl No Command Name
1 agent <ip_address>
2 community <community>
3 port <port>
4 subnet_mask <IPAddress>
5 cancel
6 exit
7 save
10.9 system snmp trap delete <agentIp>
Sl No Command Name
1 agentIp
Description
Save access Management changes for
https and exit current mode.
Roll back Remote Mgmt changes.
Description
Set system contact information.
Set system location information.
Set system name information.
Roll back snmp configuration changes.
Save SNMP system configuration
changes.
Save SNMP system configuration
changes and exit current mode.
Description
The IP address of the SNMP agent.
The community string to which the
agent belongs. Most agents are
configured to listen for traps in the
Public community
SNMP trap port the trap messages will
be sent to.
The network mask used to determine
the list of allowed SNMP managers. To
allow any IP on the network to manager
the dev
Roll back snmp configuration changes.
Save SNMP trap configuration
changes and exit current mode.
Save SNMP trap configuration
changes.
Description
The IP address of the SNMP agent.
58
CLI Reference Guide
Type and Description
Type and Description
String,
System contact identifier
String,
System location identifier
String,
System name identifier
Type and Description
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
String,
Community name
Port number (0..65535)
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
Type and Description
IP address AAA.BBB.CCC.DDD