Net Port Management Configure <Port_Name; Net Radvd Configure - D-Link DSR-250 Cli Reference Manual

Unified Services Router
8.19 net port management configure
<port_name>
Sl No Command Name
1 port_name
2 auto_negotiation_enable
3 duplex_mode
4 enable
5 speed
6 cancel
7 exit
8 save

8.20 net radvd configure

Sl No Command Name
1 enable
2 life_time
3 mode
4 mtu
5 preference
6 flags managed_enable
7 flags other_enable
Description
port name LAN/WAN to manage
dedicated port's
Select this to let the gateway and
network to determine the optimal port
settings.
Choose between Half Duplex and Full
Duplex based on the port support. The
default is Full Duplex for all ports.
Enable/Disable the port status
One of three port speeds can be
selected: 10 Mbps, 100 Mbps and 1000
Mbps (i.e. 1 Gbps). The de
fault setting is 1000 Mbps for all ports
Roll back port management
configuration changes
Save port management configuration
changes and exit current mode
Save port management configuration
changes
Description
Enable the RADVD process here to
allow stateless auto configuration of the
IPv6 LAN network
The lifetime in seconds of the route.
The default is 3600 seconds.
select N to send router advertisements
(RA's) to all interfaces else Y
This is used in RA's to ensure all nodes
on the network use the same MTU
value in the cases where the LAN MTU
is not well known. The default is 1500
Chose between low/medium/high for
the preference associated with this
router's RADVD process
Chose Managed to use the
administered /stateful protocol for
address auto configuration
the Other flag is selected the host uses
administered/stateful protocol of other
(i.e. non-address) information auto
configuration.
27
CLI Reference Guide
Type and Description
Port name,
Port1-LAN/Port2-WAN
Boolean Choice (Y/N)
Enable/disable auto negotiation
option,
Duplex mode type,
Half or full
Boolean choice (Y/N),
Port status enable/disable
Port speed type,
10/100/1000
Type and Description
Boolean choice (Y/N),
Radvd status
Integer,
Advertisement Lifetime
Boolean Choice (Y/N),
Advertisement mode status
Mtu size,
It takes value between 1200 to
1500.
Radvd preference type,
Low/medium/high
Boolean choice (Y/N)
Enable or disable the managed flag
Boolean choice (Y/N),
Enable or disable other flags