D-Link DSR-250 Cli Reference Manual page 23

Unified Services Router
Sl No Command Name
30 vpn sslvpn users domains edit
31 vpn sslvpn users domains delete
32 vpn sslvpn users groups add
33 vpn sslvpn users groups edit
34 vpn sslvpn users groups delete
35 vpn sslvpn users users ip_policies configure
36 vpn sslvpn users users ip_policies delete
37 vpn sslvpn users users browser_policies
38 vpn sslvpn users users login_policies
The command dot11 ? at the CLI prompt would give the description of all the configuration
commands in the branch dot11, which is as follows:
Sl No Command Name
1 dot11 access point configure
2 dot11 access point delete
3 dot11 access point disable
4 dot11 access point enable
5 dot11 access point mac add
6 dot11 access point mac delete
7 dot11 radio advanced configure
8 dot11 radio configure
9 dot11 profile configure
10 dot11 profile delete
Each of the above listed commands has in turn a set of sub -commands to fulfill the
requirements. The command – subcommand list is given in following sections.
Purpose
Domains edit mode
Domains delete mode
Groups add mode
Groups edit mode
Groups delete mode
Ip policies configure mode
Ip policies delete mode
Browser policies configuration mode
Login policies configuration mode
Purpose
802.11 access point configuration mode
Delete an 802.11 access point.
Disable an 802.11 access point.
Enable an 802.11 access point.
Add a MAC Address to ACL List of an AP
Delete a MAC Address from an ACL List of an AP.
802.11 advanced radio configuration mode.
802.11 radio configuration mode.
802.11 profile configuration mode.
Delete an 802.11 profile.
21
CLI Reference Guide