Net Radvd Pool Add/Edit; Net Radvd Pool Delete <Row_Id; Net Routing Dynamic Configure - D-Link DSR-250 Cli Reference Manual

Unified Services Router
Sl No Command Name
8 cancel
9 exit
10 Save

8.21 net radvd pool add/edit

Sl No Command Name
1 prefix_address
2 prefix_length
3 prefix_life_time
4 prefix_type
5 sla_id
6 cancel
7 exit
8 save
8.22 net radvd pool delete <row_id>
Sl No Command Name
1 row_id

8.23 net routing dynamic configure

Sl No Command Name
1 authentication_enable
2 direction
3 ripng_enable
Description
Roll back radvd configuration changes
Save radvd configuration changes and
exit current mode
Save radvd configuration changes
Description
It specifies the IPv6 network address
The prefix length variable is a decimal
value that indicates the number of
contiguous, higher order bits of the
address that make up the network
portion of the address
The length of time over which the
requesting router is allowed to use the
prefix
Option whether to select the prefix type
as 6to4 or Global/Local/ISATAP
The SLA ID (Site-Level Aggregation
Identifier) in the 6to4 address prefix is
set to the interface ID of the interface
on which the advertisements are sent
Roll back mode configuration changes
Save mode configuration changes and
exit current mode
Save mode configuration changes
Description
Row Id of the multihoming entry to be
deleted
Description
Enable/Disable Authentication for RIP-
2B/2M
rip direction None, In only, Out only,
Both.
Enable/Disable the RIPNG functionality
28
CLI Reference Guide
Type and Description
Type and Description
prefix address,
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd where each part is in the
range [0-9A-Fa-f:]
Integer,
Prefix length
Integer,
Life time value
IPv6 prefix type,
6To4/Global/Local/ISATAP
Integer,
Site-Level Aggregation Identifier
Type and Description
Unsigned integer
Row id number
Type and Description
Boolean Choice (Y/N)
Authentication status for RIP-
2B/2M
Rip direction type,
None/In-only/Out-only/Both
Boolean Choice (Y/N)