D-Link DSR-250 Cli Reference Manual page 71

Unified Services Router
Sl No Command Name
general_select_
5
local_gateway
general_remote_en
6
d_point_type
general_remote_en
7
d_point ipaddress
general_remote_en
8
d_point fqdn
general_enable_mo
9
de_config
general_enable_ne
10
tbios
general_enable_ro
11
llover
general_protocol
12
general_enable_dh
13
cp
general_local_net
14
work_type
general_local_sta
15
rt_address
general_local_end
16
_address
general_local_sub
17
net_mask
general_remote_
18
network_type
Description
In the event two WAN ports are
configured to connect to an ISP, select
the gateway that will be used as the
local endpoint for this IPsec tunnel.
Select the type of identifier that you
want to provide for the gateway at the
remote endpoint: IP Address or FQDN
(Fully Qualified Domain Name)
IPAdress of the remote host
Full Qualified Domain Name of remote
host
Enables Mode Config feature. Mode
Config is similar to DHCP and is used
to assign IP addresses to remote VPN
clients, like iPhone VPN Client.
enable/disable this to allow NetBIOS
broadcasts to travel over the VPN
tunnel.
Check this box to allow the VPN to
rollover when WAN Mode is set to Auto
Rollover on the WAN Mode page.
Select protocol of the tunnel
Check this box to allow VPN clients to
connect to your router over IPsec and
get an assigned IP using DHCP.
Select the IP addresses on the local
side that will be part of the tunnel. This
can be either a single IP address,
several IP addresses in a range, an
entire subnet, or any IP address that
want to connect.
IP address from where the range needs
to begin
IP address where the range needs to
end
Subnet mask of the subnet used
Select the IP addresses on the remote
side that will be part of the tunnel. This
can be either a single IP address,
several IP addresses in a range, an
69
CLI Reference Guide
Type and Description
Vpn Local gateway
(DedicatedWAN/ConfiguredWAN)
Remote end point type(Ipadress
/fqdn)
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255,remote end pointt
String,remote end point
ModeConfig Boolean choice (Y/N)
netbiosenable Boolean choice
(Y/N)
RollOver Boolean choice (Y/N)
Vpn Protocol (AH/ESP)
DHCP over ipsec Boolean (Y/N)
vpn network type
(ANY/SINGLE/RANGE/SUBNET)
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
vpn network type
(ANY/SINGLE/RANGE/SUBNET