Chapter 7: Playback; Playback Control - Q-See QSD6209C9-250 User Manual

7. Playback

7.1 Playback Control

SEARCH VIDEO
DISK:MASTER
08/09/19 11:16:31 -08//09/19 15:05:48
TYPE:EVENT
PLAY:2008/09/19
) MOVE （SEL）SELECT
(
( ) PLAY (MENU)PREV MENU
To choose and playback a recorded event:
When you first open the SEARCH VIDEO window the arrow will be pointing at the most recent event
(0002).Use ［▲UP］or ［▼DOWN］buttons to find the event that you want to view and then press the PLAY
button. The event you have chosen will start playing.
2007/09/19=year/month/day 15:05:43=hour/minute/second
[NOTE] When the arrow is pointing at a specific event the date and time below HARD DRIVE: MASTER
shows the beginning (date and time) to the ending (date and time) of that recorded event.
To manually input a specific time to be viewed:
1. Open the SEARCH VIDEO window by pressing the "MENU" button while in "PLAY" mode.
The arrow will be next to the most recently recorded event.
2. Press the "MENU" button and the arrow will move below to the TYPE field.
3. Move the arrow left or right by using the UP "▲" and DOWN "▼" buttons to TIME and press
"SEL" to enter it.
4. Finally, move the arrow left or right by using the
UP "▲" and DOWN "▼"buttons to input the desired starting date and time, then press the
and
"PLAY" button and the DVR will start playing.

Chapter 7: Playback

SLAVE[NONE]
TIME
15:07:43
When you press the [ PLAY] button the DVR goes
into PLAY mode.
When you press the MENU button during PLAY mode
the SEARCH VIDEO window will open as illustrated
on the left. While in this window you can either choose
and playback a recorded event or manually input a
specific time to be viewed.
[ and ]
19
buttons to the desired position