Camera Setup; Record Setup; Record Framerate - Q-See QSD6209C9-250 User Manual

5.1 Camera Setup

1 ON 2 OFF
CAMERA SETUP
4 ON 5 ON
7 ON 8 ON
（SEL）SELECT
( )MOVE

5.2 Record Setup

1 ON 2 OFF
RECORD SETUP
4 ON 5 ON
7 ON 8 ON
（SEL）SELECT
( ) MOVE
5.3 Record Frame rate
1 5 FPS 2 5 FPS

RECORD FRAMERATE

TOTAL 45FPS
4 5 FPS 5 5 FPS
7 5 FPS 8 5 FPSN
（SEL）+ ( □ ) -
( )MOVE
hard drive disk space will be needed to save the recorded video.
This DVR system supports up to 9 cameras. You can
3 ON
configure which cameras are displayed or not displayed
in real-time monitoring.
Press [▲, ▼,
6 ON
and then press [SEL] to modify the setting to be ON or
OFF.
9 ON
(MENU) EXIT
Configure which channel is allowed to record. Press [▲,
3 ON
▼,
press [SEL] to modify the setting to be ON or OFF.
6 ON
9 ON
(MENU)EXIT
The total frame rate is 50fps (PAL)/ 60fps (NTSC). You
can set the frame rate for the channel which you selected
3 5 FPS
to record. If the sum of the frame rate you select for all
cameras is more than 50fps (PAL)/ 60fps(NTSC), the
DVR will automatically adjust the largest frame rate value
6 5 FPS
to a smaller value.
Press [▲, ▼,
and then press [SEL] to increase the value or press
9 5 FPS
[■STOP] to reduce the value.
(MENU) EXIT
The higher frame rate used to record，the more natural the
movement will appear during play back, but more
6
and ] buttons to select a channel,
and ] buttons to select a channel, and then
and ] buttons to select a channel,