Scan Images Screen - Kodak PS400 Series User Manual

Scan Images screen

A-61601 June 2010
When you click Continue on the Customer Order Information screen,
the Scan Images screen will be displayed.
If you are re-opening an order, you may scan additional images or
move to the next screen.
Scan Settings — at the top of the Scan Images screen, the current
Scan Settings are displayed. If these settings are not acceptable, you
can change them by clicking the Settings button. For more information
regarding these settings, see the section entitled, "Scan Settings
screen".
16-Up Display window — displays up to 16 images at a time.
Previous — goes back to the Customer Order Information screen.
Start Over — goes back to the Customer Order Information screen and
clears the system of all data for the current order. The confirmation
message Do you want to start over? will be displayed.
Batch Scan — scans batches of photos using the Picture Saver
System Scanner and displays the Scan Viewer screen.
Flatbed Scan — if an optional Kodak A3 or A4 Flatbed is attached, and
you select this option, photos will be scanned from the flatbed and the
Scan Viewer screen will be displayed.
Image Cleaner Tool — when checked, the Picture Saver System will
make every attempt to eliminate any streaks in the image during the
scanning process. Applying the Image Cleaner Tool does not slow
down the scanning process. Frequently streaks in images are caused
because the scanner has accumulated dust and dirt. Be sure your
scanner is clean to help prevent streaks in images.
NOTE: The Image Cleaner tool is not applied to flatbed scans.
3-3