Attaching The Optional Output Tray Kit - Kodak PS400 Series User Manual

Attaching the optional
output tray kit
A-61601 June 2010
The Kodak Picture Saver System Scanner is shipped with an optional
output tray kit, which includes: an output tray extension and dangler.
This output tray is optional but is recommended when scanning large
stacks of photos or documents.
To install the output tray kit:
1. Remove the standard output tray from underneath the scanner by
pressing down on the two tabs and pulling the output tray out of
position.
2. Press and hold the tilt button and rotate the scanner body to the
downward position.
NOTE: The scanner must be in the downward position when using
this output tray.
dangler
output tray extension
2-5