Kodak PS400 Series User Manual page 26

Scan Images screen
(continued)
A-61601 June 2010
When you click Batch Scan or Flatbed Scan on the Scan Images
screen, fullsize 1-up images will be displayed in the Scan Viewer
screen as the photos are being scanned. After the batch is scanned,
the Scan Viewer screen will close and the photos will be rearranged
and displayed in the order they were scanned. You can edit the entire
batch or individual images, or scan another batch for that customer
order.
NOTE: To edit an individual image, click on the thumbnail. The
Enhance Picture screen will be displayed.
16-Up Display window — displays up to 16 images at a time.
Rotates the image 90 degrees counter-clockwise (left).
Rotates the image 90 degrees clockwise (right).
Rotates the image 180 degrees. (Available on the PS810
Scanner only.)
Moves to the previous set of 16 images, if any.
Moves to the next set of 16 images, if any.
Scanning Completed — displays the Order Preview screen.
Previous — goes back to the Customer Order Information screen.
Start Over — goes back to the Customer Order Information screen and
clears the system of all data for the current order. The confirmation
message Do you want to start over? will be displayed.
Batch Scan — allows you to scan another batch of photos into the
same order # from the Kodak Picture Saver System Scanner.
3-5