Kodak PS400 Series User Manual page 30

A-61601 June 2010
Sharpen Images — sharpens the focus and edges of the scanned
image. If this option is selected, all photos within the batch (the stack of
photos to be scanned) will be sharpened unless the setting is changed
again. For the Picture Saver Scanning System PS810 Scanner,
sharpening is applied when the images are scanned instead of just
after scanning is completed.
The options are:
• None: no sharpening will be done. This is the default.
• Low: low amount of sharpening applied.
• High: high amount of sharpening applied.
NOTE: Low is the recommended sharpening setting in most cases
where sharpening is desired. This option is not recommended
for grayscale images.
Compression — select one of the following compression settings.
Best is the default.
• Best — optimum compression, best image quality. Creates a smaller
file size than Superior compression. Select Best if you want
standard size reprints of scanned image files.
• Superior — minimum compression, superior image quality. Creates
a file that is 5 to 10 times larger than Best compression, which will
impact performance. Select Superior if you want to reprint
enlargements of scanned image files.
Transport timeout — allows you to set the amount of time the scanner
will wait after the last photo enters the transport before the transport
timeout action is taken. You can specify a time delay setting from 1 to
20 seconds to allow more time to insert the next photo or document into
the current batch.
Output Media — determines whether files are partitioned to fit onto a
Kodak Picture CD, CD or DVD based on file size.
• Prompt for Media: if selected, you will be asked to select Kodak
Picture CD, CD or DVD output after scanning is complete.
3-9