Scan Images Screen - Kodak PS50 Series User Manual

Scan Images screen

A-61760 September 2012
When you click Continue on the Customer Order Information screen,
the Scan Images screen will be displayed.
Scan Settings — at the top of the Scan Images screen, the current
Scan Settings are displayed. If these settings are not acceptable, you
can change them by clicking the Settings button. For more information
regarding these settings, see the section entitled, "Scan Settings
screen".
16-Up Display window — displays up to 16 images at a time within the
active folder.
Moves to the previous set of 16 images
Moves to the next set of 16 images
Previous — goes back to the Customer Order Information screen.
Start Over — goes back to the Customer Order Information screen and
clears the system of all data for the current order. The confirmation
message Do you want to start over? will be displayed.
Batch Scan — scans batches of photos using the Picture Saver
System Scanner and displays the Scan Viewer screen.
Flatbed Scan — if an optional Kodak A3 or Legal Flatbed is attached,
this button will be displayed. Photos will be scanned from the flatbed
and the Scan Viewer screen or the Photo Selector screen (if installed
and enabled) will be displayed.
3-3