Adding A Unicast Sntp Server - Cisco SF500-24 Administration Manual

System Time
Configuring System Time
STEP 3
NOTE
STEP 1
Cisco 500 Series Stackable Managed Switch Administration Guide
Week
- —Week within the month from which DST begins every year.
Month
- —Month of the year in which DST begins every year.
Time
- —The time at which DST begins every year.
• To—Date when DST ends each year. For example, DST ends locally every
fourth Friday in October at 5:00 am. The parameters are:
Day
- —Day of the week on which DST ends every year.
Week
- —Week within the month from which DST ends every year.
- Month —Month of the year in which DST ends every year.
Time
- —The time at which DST ends every year.
Click Apply. The system time values are written to the Running Configuration file.

Adding a Unicast SNTP Server

Up to eight Unicast SNTP servers can be configured.
To specify a Unicast SNTP server by name, you must first configure DNS server(s)
on the switch (see the
SNTP server, check the box enable SNTP Client Unicast.
To add a Unicast SNTP server:
Click Administration > Time Settings > SNTP Unicast The
opens.
This page displays the following information for each Unicast SNTP server:
• SNTP Server—SNTP server IP address. Up to eight SNTP servers can be
defined. The preferred server, or hostname, is chosen according to its
stratum level.
• Poll Interval—Displays whether polling is enabled or disabled.
• Authentication Key ID—Key Identification used to communicate between
the SNTP server and switch.
Defining DNS Servers section). In order to add a Unicast
SNTP Unicast
7
page
86